Most Common Commercial Dishwasher Problems You Should Know About

The purpose of dishwashers is quite self-explanatory, and is an absolute blessing for house owners who are in charge of washing the dishes till the time commercial dishwasher repairs come into play.

Commercial dishwasher repair companies

When dishwashers stop working optimally, the problems which are outlined below are usually the cause, and this article will identify them abundantly for you to be able to diagnose them yourself to some extent before you call in commercial appliance services.

Dishwasher Not Starting

Usually you have an electronic control you can change depending on your needs, and the press of a button or the turn of a knob is sufficient for the washer to start. However, if one fine day it refuses to work with those steps, here is what you can try before you call up commercial dishwasher repairs:

  • Check if something is stopping the door from closing, or if the latch of the door is functioning properly or not.
  • Check for the power supply and see if it is sufficient/intact, and check if there are any burn marks on the wire.
  • Check if the other electronic functions are working properly.

Dishwasher Making Too Much Noise

If your dishwasher suddenly starts making a lot of noise then one thing is for certain; you will have to get your unit checked by one of the commercial appliance services operating in your area, because it is not worth the risk to open up a complex machine without expertise. On the bright side, these repairs are not very expensive to be performed. Usually what causes dishwashers to be noisy is:

  • The rotating motor getting rusted or dislocated.
  • The brushes getting worn out due to consistent usage.

Leakage Right After Filling

If you can clearly observe your dishwasher spilling water as soon as you start filling it, and you are sure that the door hatch is sealed shut from the top, you have a considerable problem to think about. Commercial dishwasher repairs are experts in managing such problems on grand scales, so you should not be worried about the problem being permanent. The common reasons of leakage are:

  • The inlet being blocked due to lack of maintenance, causing the washer to gush out from potentially weaker areas in the pipe.
  • The seal of the door loosening with time.

Unclean Dishes After Wash

The least you expect out of your dishwasher is for the dishes to come out all sparkly and bright after the wash. When that does not happen however, there is a definite problem with your dishwasher’s internal component(s) which you should get checked by commercial appliance services fairfax so that you do not end up wasting more water and energy than you should spend on the project. This problem is usually caused by:

  • The filters and the tubes inside of the enclosed system becoming blocked or dysfunctional.
  • The detergent not blending in with the water causing the dishes to remain unclean even after a long wash.